SPECIAL
FILLER K1
One-component filler
Single-component levelling material - filler that does not require hardener addition. Due to the corresponding covering and filling properties and very good adhesion, it is possible to apply the material to almost all surfaces. It is resistant to chemical and atmospheric agents, is easy to apply and sand.
800 ml
gray
SPRAY FILLER
Spray putty
Designed for spray gun application. It creates a perfectly smooth surface even on very large surfaces. Easily isolates primers and acrylic varnishes from polyester putties. It protects against surface defects caused by the use of too much or too little hardeners in putties coated with a trowel. It creates a well-adherent layer and can be applied to perpendicular surfaces.
1 kg / 3 kg
gray
FILLER HS 4:1 / HARDENER 1:4
Acrylic base 4:1 / hardener 1:4
Two-component high-quality base - filler for most common surfaces. It ensures excellent flow and perfect covering power. It has very good filling properties. After dilution, it is applicable by wet to wet method. It quickly dries even on a very coarse layer and it can be well sanded. It creates a base that ensures the perfect look of the top varnish.
800 ml + 200 ml / 4 l + 1 l
gray, black, white
SILICONE REMOVER
Silicone remover
A preparation designed to clean the surface before puttying or painting. Impurities such as silicone, wax and grease affect the quality of top spraying, especially their adhesion and cohesion. Can be used for both metal and plastic surfaces.
1 l / 5 l
SEAM SEALANT
Polyurethane putty
Fast-drying, elastic, thixotropic sealant that is easy to sand and revarnishable and is designed for plastics, metals and wood. It is used for bonding and puttying when installing car parts or for repairs in households.
310 ml
gray, black, white
CLEAR HS 2:1 / HARDENER HS 1:2
Acrylic varnish 2:1 / hardener HS 1:2
This varnish has been developed on the basis of high quality acrylic resins and is recommended for car body and machine repairs. It has a high dry content, perfect gloss, excellent weather resistance, ideal clarity and good polishing properties. Prior to use, the varnish must be mixed with HS hardener 1:2 in a ratio of 2 parts of varnish and 1 part of hardener.
varnish 5 l / hardener 2,5 l
THINNER
Acrylic thinner
High-quality acrylic thinner used to modify the consistency of acrylic fillers and varnishes. It is suitable for all acrylic paints.
5 l
CONTACT
RUSTBREAKER s.r.o. Place of business / storehouse: Vazová 2630, 688 01 Uherský Brod
Phone: +420 572 544 270 | Mobil: +420 606 787 575 | Fax: +420 572 544 271
Email: info@brunox.cz | Web: www.rustbreaker.cz
